Peptide COA Explained
A peptide COA, short for certificate of analysis, is the report a laboratory issues after testing a specific production lot of material. It states what was measured, which method produced each result, and whether the lot met the stated specification. A peptide certificate of analysis is tied to one lot number, not to the compound name in general, which is the detail that separates real documentation from a marketing sheet.
This page covers what a peptide COA has to include to function as documentation, how it differs from a generic specification sheet, and where to find Off-White Labs' own published certificates. For a full walkthrough of every section of a report, see the longer reference note on how to read a peptide certificate of analysis.
What a peptide COA actually documents
A peptide COA reports results against a defined lot of material, usually identity, purity, net peptide content, and water content, with counter-ion content, residual solvents, endotoxin level, and sterility on more complete reports. Each line names a method, a measured value, and a pass or fail judgment against the stated specification.
A specification sheet, by contrast, lists the ranges a material is expected to fall within in general, for every lot a manufacturer produces. It is useful as a reference but it is not a test result. A peptide certificate of analysis and a specification sheet answer different questions: one says what a lot actually measured at, the other says what a lot is supposed to measure at.
Why the lot number is the whole point
A peptide COA is only documentation for the vial it was issued against. The lot number on the report has to match the lot number printed on the vial in hand, not just the compound name. A report for the right material but the wrong lot describes a different production run, with its own separate test results, and should not be treated as evidence for the vial actually received.
Off-White Labs ties every published certificate to the lot shipped, and the documentation archive lists available reports by material and lot number so that match can be checked directly against the label.
Identity and purity are reported separately
A peptide COA that only states a purity percentage has not confirmed identity. Purity, typically from HPLC, measures how much of the detected material is the target compound relative to everything else in the sample. Identity, typically from mass spectrometry, confirms the material is the molecule the label claims by comparing observed mass to the expected value. A complete report states both separately rather than folding them into a single number.
Net peptide content vs. a purity percentage
Lyophilized peptide powder is not pure peptide by mass. It carries absorbed water and, depending on the synthesis route, a counter-ion such as acetate or trifluoroacetate left over from purification. A peptide COA that reports only a purity percentage describes how clean the peptide fraction is relative to everything else detected in the sample, not how much of the total vial mass is the peptide itself.
Net peptide content is the separate figure that states what fraction of the total powder mass is peptide once water and counter-ion content are subtracted. A lot can carry a high purity figure and a comparatively low net peptide content, so a buyer working from vial mass rather than relative purity should look for net peptide content specifically on the report.
Finding a published peptide COA at Off-White Labs
Off-White Labs publishes lot specific certificates of analysis for the materials in its catalog, including BPC-157, GHK-Cu, Tesamorelin, and the CJC-1295 / Ipamorelin blend. Search the documentation archive by material name or lot number to find the report for a specific vial. Every material's own catalog page links directly to its available documentation.
All materials are sold for laboratory research use only and are not for human or veterinary use, a standard covered in full on the research use policy.
Common questions
What is a peptide COA?
A peptide COA, or certificate of analysis, is a laboratory report issued against one specific production lot of material. It states what was tested, which method produced each result, and whether the lot met the stated specification, typically covering identity, purity, net peptide content, and water content.
What is the difference between a peptide certificate of analysis and a specification sheet?
A peptide certificate of analysis reports actual measured results for one specific lot. A specification sheet lists the general range a material is expected to fall within across every lot a manufacturer produces. The certificate is a test result for the vial in hand; the specification sheet is a reference range, not a result.
Does a peptide COA confirm both identity and purity?
A complete peptide COA states both separately. Purity, usually from HPLC, measures how much of the sample is the target compound relative to everything else detected. Identity, usually from mass spectrometry, confirms the material is the correct molecule. A report listing only one of the two has not established both findings.
Where can I find a published peptide COA from Off-White Labs?
Off-White Labs' documentation archive lists published certificates of analysis by material and lot number. Search by the material name, such as BPC-157 or GHK-Cu, or by the lot number printed on the vial to find the report tied to that specific batch.
Batch documentation, as it publishes.
New certificates of analysis and reference notes, sent when they are posted. No more than that.